setenv devtype mmc
setenv bootpart 0:2
setenv bootdir /boot
setenv bootargs console=${console} ${optargs} root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 video=DVI-D-1:800x480MR-16@60 

load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt
env import -t ${loadaddr} ${filesize}

setenv fdtdir ${bootdir}/dtbs/${uname_r}

# Initialize ULCD7 power control chip
i2c dev 1
  i2c mw 40 00 00
  i2c mw 40 04 80 # backlight intensity, if dimmer kicked on
	# Turn off all dimmers (so pullups do their things) on
	#  LED0 (bits 1,0) : NC
	#  LED1 (bits 3,2) : LCD power supply enable
	#  LED2 (bits 5,4) : LCD backlight PWM
	#  LED3 (bits 7,6) : LCD standby
  i2c mw 40 0c 00
	# Turn off all dimmers (so pullups do their things) on
	#  LED4 (bits 1,0) : LCD down/up (up)
	#  LED5 (bits 3,2) : LCD dithering off/on (off)
	#  LED6 (bits 5,4) : LCD mode hsvs/desync (hsvs)
	#  LED7 (bits 7,6) : LCD left/right (left)
  i2c mw 40 0d 01
i2c dev 0

ext4load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/vmlinuz-${uname_r}
# ext4load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/initrd.img-${uname_r}; setenv rdsize ${filesize}

load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/omap3-beagle-xm.dtb
fdt addr ${fdtaddr}
fdt resize 8192

load ${devtype} ${bootpart} 0x88040000 /boot/dtbs/nwf/lcd-tsc2007.dtso.dtbo
fdt apply 0x88040000

echo debug: [${bootargs}] ...
echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ...
# bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}
bootz ${loadaddr} - ${fdtaddr}